Follow the simple steps below to sucessfully install your Haibak Wind Deflector for any model that we stock. Before you start make sure your vehicle is clean, the area where the deflector will be inserted is free of all dust and dirt particles, and you have a screw driver, a cleaning cloth and some window cleaner prodct on hand.

Step 1

Unpack and remove stickers

Unpack and correctly position the deflectors. Use larger ones for front windows, smaller ones for rear windows.

Step 2

Insert into window slots

Work on one window at a time. First, grasp the deflector firmly on both sides, then slowly push it upwards into the slots as shown in the figure. Continue moving it upward until the deflectors are securely locked in place.

Step 3

Insert metal clips

Once you have securely locked all your deflectors in place, you will need to fasten them using the provided metal clips. You should use two clips for each window. Simply take each clip with the opening facing downward and push it into the deflectors on both sides. This will ensure a secure fitting.

Step 4

Finish Installation

Repeat Steps 1 through 3 on the opposite side of the vehicle. If you have a four-door vehicle, complete the process for all four windows. If you have a two-door vehicle, complete both the driver's and passenger's sides. Once all the deflectors are installed, use some window cleaner to wipe away any fingerprint marks for a clean finish.